Teknik Bilgiler
– For Wall and ceiling Surface Mount / Tinted Bubble
– Vandal and Tamper-Resistant
– 1/3″ Progressive Scan CCD Sensor (D&N Camera)
– Removable IR Cut Filter
– Integrated F1.2/3.8-9.5mm Varifocal Lens, DC Iris
– Resolution of 480 Horizontal Lines
– Wide Dynamic Function (WDR)
– On-screen Menu Control / Camera Title Display
– Back Light Compensation (BLC)
– Automatic White Balance (AWB)
– Manual 3-axis Camera Adjustment
– For Easy Indoor and Outdoor Installation
– Video standard: CCIR/PAL
– System: day&night
– Sensor: size 1/3″
– Imager: CCD, Sony Progressive Scan Interline Transfer
– Active picture elements: approx. 440,000, 752(H) x 582(V)
– Synchronization: Internal
– Signal-to-noise ratio: 50dB (B&W, AGC OFF)
– Sensitivity (at 50% video signal): 0,56Lux, (colour, AGC High, DSS Off), 0.03Lux, B&W (10x integration) at F1. 2 each. VT measurement result including bubble
– Horizontal resolution: 480TVL
– Rotation range: manual: 360°
– Privacy Zone masking: 4 Areas, Masking, X/Y start/end
– Automatic gain control (AGC): OFF/LOW/MID/HIGH selectable
– Gamma correction: approx. 0.45
– Automatic shutter (AES): 1/50 ~ 1/10.000sec. (not available during Auto Iris ON)
– Integration rate: yes
– Low speed shutter (DSS) DSS: OFF / 2 ~ 20 Fps / 40 Fps / 80 Fps / 160 Fps mode
– Wide dynamic range: On/Off switchable
– Dynamic range (WDR): 60db
– Digital Noise Reduction (DNR): no
– Flickerless function: On/Off switchable
– White balance (AWB): 2500 ~ 9500K, Automatic/Hold/User selectable
– Backlight compensation: BLC, On/Off switchable
– Aperture Correction (APC): Horizontal and vertical
– IR cut filter: yes, with adjustable delay time
– Video outputs (type): CVBS, VBS
– Video outputs: 1Vp-p, (C)VBS, 75ohms, BNC
– Lens mount: integrated lens
– Lens type: varifocal
– Lens: F1.2/F2.0~360 / 3.8~9.5mm with galvanometer controlled iris
– Application range: security
– Nominal format size: 1/3″
– Aspherical technolog: yes
– Focal length: 3,8-9,5mm
– Horizontal angle of view: 74,2-30°
– Digital Zoom: 3x
– Focus range: 0.15m ~ ?
– Iris control: DC
– Mount: n/a
– OSD function control: Main menu: Camera-ID no., Camera title/text, Colour/B&W switching, Scharpness, Mirror function, Positive/Negative switching. AWB: White balance red/blue, automatic. AE: Brightness, Flickerless, High speed shutter, Low speed shutter (DSS), AGC, Brightness. Day&Night modes (Auto, Day, Night, external), IR Filter (delay). WDR: Mode, BLC. Privacy Zones: Area, Masking, X/Y start/end. Display: OSD, Function display ON/OFF. Initial: Camera settings ON/OFF
– Day / Night Switching: Automatic/Day/Night
– Cable connection: Video (BNC), 12VDC (DC jack), RS-485 (2-pin terminal)
– Serial interfaces: RS-485, Protocols: Pelco D and Eneo control Software (details upon request)
– Serial port: (control S/W, interface protocols: Pelco D, further upon request)
– Temperature range (Operation): -10° ~ +50°C
– Heater: no
– Protection rating: IP65, at installation according to the manual
– Supply voltage: 12VDC, (9 ~ 15VDC), 12VDC ±0,5V recommended
– Power consumption: 6.0watts max.
– Vandalism resistant: yes
– Bubble: 100mm diameter, Vandal resistant 3mm -tinted- polycarbonate with high resistance
– Colour (bubble): tinted
– Camera adjustment: 3-axis camera adjustment: 360° horizontal rotation / +-45° tilt rotation, 360° pan rotation
– Camera fixing: no
– Mounting: surface mount
– Housing: indoor housing, Die-cast aluminium with tinted polycarbonate bubble
– Housing material: aluminium
– Colour (housing): Pantone Cool Gray 1C
– Weight: 840g
– Parts supplied: Mounting screw kit, Torx wrench key, Service monitor cable (Cinch plug), Guide pattern, Manual